With the DIGISYSTEM operators can locate, trace and mark underground services quickly, precisely and reliably prior to excavation.
Health and Safety authorities all over the world advise that before undertaking any kind of excavation operators should firstly scan an area with a Cable Avoidance Tool. Even with this advice, site workers are still injured and killed due to inadvertently striking buried cables. The DIGISYSTEM product family works to eliminate these sorts of risks on your site by removing the possibility for human error from the locating process using the latest in location technology. By introducing an automatic pinpointing facility to accurately locate the cable, always starting up in power mode.
The DIGICAT 100 unit is designed to help avoid damage to underground services during excavation and is an easy to operate, fully automatic location system with the ability to manually tune if preferred. Active signal tracing is available by using the DIGITEX signal generator
Dual mode active tracing for on-site flexibility
Controls: On/Off & Mode select.
Frequencies: Power 50/60Hz, Radio 15-30kHz, Generator 8 & 33kHz
Depth range: Power/Generator 3 metres, Radio 2 metres
Dust and water protection to IP54
In addition to the well proven functions of the DIGICAT 100 the DIGICAT 200 offers a one stop depth estimation. In co-operation
with the DIGITEX 8/33 (operating in the 33kHz mode) the real depth and location of all services can be found. Available in two display formats, offering depth estimation to 3m or 10ft and an accuracy of approx. +/- 10
The Digicat 500i and 550i represent the latest design in cable location technology. With state-of-the-art digital signal processing (DSP) and intelligent software, the Digicat i-Series locators make ground surveys a simple and speedy task; increasing onsite safety and ultimately saving time and money.
The Digicat 500i and 550i locate buried conductive services by receiving electromagnetic signals which radiate from them. The Digicat's software interprets the signals and provides the operator with an audible and visual response to the position and direction of the buried services.
Contains the same functionality as the Digicat 500i, however it offers the added benefit of service depth estimation, when used in conjunction with the Digitex 8/33 signal generator or Sonde in 8/33 kHz mode. Available for 50 Hz or 60 Hz to suit your regions mains power frequency.
Designed in conjunction with the DIGICAT locator, to easily and accurately trace the route of, or locate, an underground cable or metal pipe that does not carry a naturally present signal. The DIGITEX generates a specific "active" signal, which can then be traced using the DIGICAT.
Unique DIGICAT Benefits
Always switches on in POWER mode for maximum safety. This ensures that you will locate services carrying a power current first as these can be the most dangerous to hit.
Starts up with maximum sensitivity for safe operation, there is no need to adjust any awkward controls, this speeds up the location process considerably.
Fully automatic pinpointing for quick and accurate location of the relevant service, without the need for any adjustment by the operator. The DIGICAT 100 Unit has got the facility to manually adjust at the pinpointing stage if that is what the operator is used to, however all adjustments are done automatically within the electronics, no fine-tuning necessary.
In-built self-test function (user activated), which tests both the hardware and the software to ensure full functionality of the unit.
Audio visual display with simple LED indicators for maximum convenience.
Pictographic quick-guide instructions are displayed on the face of the locator to remove the language barrier and for easy on-site reference.
Network Rail approved (PADS No: 094/020050) and CableTracks enabled units also available.
With the EZDigPro, there is no need to stop digging to place the bucket and dipper stick in the same position each time you want an accurate reading.
The system's sensors take into account the movement of the bucket, boom, and dipper stick, giving you continuous depth indication while you keep working. A control box and remote display in the cab allow you to watch the ditch, bucket, and display in the same view. One of the sensors includes a laser receiver that can be used to reset the system after the machine is repositioned.
uses market standard buried service location technology to locate buried metallic services during excavation. By providing a real time warning of the presence of a buried metallic service, EZiDIG works with the operator rather than against the workflow, keeping him alert to localised threats. In this way both safety and productivity are maximised.
Digi System Accessory:
The DIGISYSTEM has a range of accessories which extend the capabilities of the main Products. The DIGISYSTEM accessories with the exception of the DIGIMOUSE are used in conjunction with the DIGITEX and DIGICATs to trace the more tricky buried services such as sewers and ducts.
The DIGITRACE is used for tracing non-metallic pipes and ducts with a diameter of up to about 15cm.
The Property Connection Set is used to trace the mains electricity cable away from one particular property
The Signal Clamp allows us to do 2 things. Firstly you can use it to trace a particular cable in a congested area by clipping it around that one cable. Say for a bundle of cables in a single duct.
Alternatively it can be used to clip around and trace a live power cable.
Improved water resistance and mechanical life are provided by our new direct contact switching with the PC board. Enjoy enhanced functioning, reliability, and maintenance for all CST locators.
Our Magna-Trak magnetic locators include a multitude of convenience features you won't find anywhere else; features like an LCD visual display and/or audio tone, a lightweight, easy-grip design, and water resistant cases.
Magna-Trak locators also feature easy battery access and outstanding battery life, and they are backed by a 5-year warranty! Plus, our patented electronic balancing procedure allows balancing to be done quickly and efficiently and all of our manufacturing is done right here at CST to ensure quality control.
The Original! The Magna-Trak 100's LCD indicator offers a digital bar graph display, in addition to a standard audio tone, to precisely identify the target object, especially in noisy, congested areas. An additional feature is a visual reminder when batteries are low.
The lightweight Magna-Trak 100 features simple, waterproof bottom, push-button membrane pad operation with an ergonomic design. The Magna-Trak 100 offers easy battery access and outstanding battery life, and is backed by a five-year warranty.
The lightweight Magna-Trak 100 features simple, waterproof bottom, push-button membrane pad operation with an ergonomic design. The Magna-Trak 100 offers easy battery access and outstanding battery life, and is backed by a five-year warranty.
Feature-Packed for Versatility! The Magna-Trak 102 magnetic locator provides the same basic performance features as the Magna-Trak 100. However, with the addition of our push-button "erase" feature, greater flexibility is achieved and performance is enhanced.
When a magnetic disturbance, such as a metal fence, is confronted, simply press the "erase" button and the disturbance is erased for continued searching without interference. No need to reduce the sensitivity; the Magna-Trak 102 always returns to perfect magnetic balance when the "erase" button is pressed.
The Magna-Trak 102 locator also includes a power line indicator feature. The LCD panel visually indicates that a power line is present. CAUTION: This feature is an aid only and is not intended for locating buried power lines.
PowerDigger provides excavator operators with real-time depth, slope and reach information, in relation to any reference, on an easy-to-read graphical display control panel mounted in the cab.
A highly visible LED light-bar gives the operator a quick reference to the desired level. An audible tone also gives the operator an 'on-grade' or 'near-grade' indication. All of the information necessary for an operator to do their job faster and more accurately is available in the cabin.
Reach for Productivity Gains with Leica PowerDigger
PowerDigger gives you the real-time information you need to increase the productivity of your machine by up to 50%. It's a reliable and flexible guidance solution that you can expand on to meet your future needs.
MC200 DepthMasteris an ideal tool for any kind of height control for Excavators. Simply turn the excavator dipper into an integrated measuring stick without having to leave the cabin. It is simple to set-up and can be used with any rotating laser
